Can You Mount Flash Bracket To Camera

Mounting Your Blink XT

This article will show you how to mountain your new Blink XT camera.

Your Blink XT comes with a mounting bracket and a screw in the box.

The mountain will be inserted into the round opening in the center of the camera's bombardment cover.  It will fit over the gray switch used to remove the bombardment encompass.

Utilize Live View for this camera by tapping this icon . Yous should hold your photographic camera in the location yous plan to install it.  Verify that this location volition give you a proficient view of the area y'all are trying to cover.

The best motion detection occurs when a bailiwick walks beyond the field of view from one side to some other rather than directly toward or away from the camera. Please keep this in mind for optimal motion detection before mounting your camera.

One time yous find the optimal location for your camera, screw the mountain into place.  Please note, apply of the included screw for mounting volition create a pigsty in the wall surface.

Once mounted to the wall, you tin can rotate the mounting bracket and open and close the hinge to pick the perfect angle for your camera. If you lot discover that the subclass is loose and causes the camera to not stay in the correct position, you lot may need to tighten the bracket. There are thumb screws on either side of the swivel. Yous can hand tighten these or use a modest flathead screwdriver to ensure that they are fully tightened.  The following video shows how to do this.

Utilise the Alive View  button to verify positioning.

When positioning your camera, you want to go along in listen that the all-time movement detection occurs when a subject walks beyond the field of view from i side to another rather than direct toward or abroad from the camera.

See examples beneath:

In one case your Glimmer XT photographic camera is mounted, here are some helpful tips:

• When it is time to replace batteries, under camera settings it will say "REPLACE" – you volition also accept a pocket-sized red bombardment meter above the camera thumbnail.
• There are battery notifications you lot can turn on to warning you of when batteries in a photographic camera become low.
• It is possible to remove the camera from the mounting subclass. This way one time the mount is attached, or once your Glimmer XT camera is mounted outdoors, you can remove it to replace batteries.
• To remove the photographic camera, agree the mount still and pull the bottom of the camera away from the mount. The mount fits very tightly and so your camera is safe and secure, don't exist afraid to pull the photographic camera off the mounting bracket.
• Our FAQ page near bombardment life and usage can be plant here.

Source: https://support.blinkforhome.com/how-to-mount-your-cameras/mounting-your-blink-xt

Posted by: hobgoodpaptur.blogspot.com

Share this post